On-line monitoring of cooling water

Petrochemical - Chemical industries In petrochemical and chemical plants a lot of cooling water is used. Although it accounts for roughly 2/ 3 of industrial water use, cooling water is relatively easy to treat and in return easy to reuse. One of the major problems, however, with open or closed cooling systems is the possible leakage of several chemical compounds into the cooling water. In order to detect and control possible leakage a Total Organic Carbon TOC) analysis or Total Carbon ( TC) analysis can be carried out. When volatile compounds such as Nafta, MTBE, gasoil, LCCS ( Light Catalytic Cracker Spirit) , Heavy CCS... need to be monitored, the on-line analyzer will be configured to TC measurements. The on-line analyzer system can be supplied as a single unit for installation at a sample take-off point, or can be integrated in a protective cabinet or shelter for outside placement. Please check the detailed section on this: » Go to System integration / Monitoring stations Sample preconditioning Many chemical compounds are characterized by poor solubility, affecting analysis results. To reach low detection limits for some hydrocarbons, the sample is homogenized at the sample inlet pipe of the TOC analyzer by a specific preconditioning unit. Product list for cooling water applications: AppliTOC® On-line TOC Analyzer AppliTek' s flagship for determining the organic load or organic contamination in water matrices, with many references around the Globe... For more information on this system, please check the AppliTOC product page Jakarta - Indonesia Telp. 021 8611 444 ( hunting) Call : 0815 614 1954, 0813 992 919 09, 0811 893 101